BOLT APP – Teradek

Use the Bolt App to remotely manage and monitor every parameter of Bolt 4K including pairing, frequency selection, and 3D LUTs.

Connect via Bluetooth

Download the Bolt App.
Enable Bluetooth on your iOS or Android device.
Navigate to the Bluetooth menu on both the transmitter and receiver, then select Enable.
Open the Bolt App from your iOS or Android device, then tap the Bolt Devices button.
Select the device(s) you want to pair or monitor.

Settings (Descriptions listed on Transmitter Display Operation section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings.
Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
Status - Displays the current status of your input, including frequency and frequency information, camera recording status, temperature, and amount of linked receivers.

Settings (Descriptions listed on Receiver Display/OSD Operation section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
Signal Quality - Determine the quality and reliability of the signal being received.
SNR (Signal to Noise Ratio) - Compare the signal power level to the noise power level from the attached antennas.
Range Analyzer - Displays the transmission distance between the transmitter and receiver.
Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
Status - Displays the name, link quality, resolution and other of your video input.