You can use the built-in menu buttons and display on Cube, Bond or Slice encoders to find the current IP address for the Ethernet and Wi-Fi connections.
The black and red buttons are 5 way directional buttons which move up, down, left, right, and can also be pressed in to select the currently highlighted item.
If you have reset your Cube to factory defaults, refer to this article for information on default IP addresses.
Ethernet
Method 1
Press in on the black button, then scroll down to and select Network Setup, Ethernet (or Wired) and the current IP address will be shown; additional network details are present under Status.
Method 2
When the Cube is at the main screen and not already within a menu, press down (not inward) on the black button repeatedly to cycle through different status messages. The Ethernet IP address will be shown after the Eth: text.
Wi-Fi
Method 1
Press in on the black button, then scroll down to and select Network Setup, WiFi, then select Status. The current network name and IP address will be shown after several seconds.
Method 2
When the Cube is at the main screen and not already within a menu, press down (not inward) on the black button repeatedly to cycle through different status messages. The Wi-Fi IP address will be shown after the WiFi: text.
NOTE: changes to the IP address or other network settings will not be automatically reflected on the menu display. Wait 10 to 15 seconds after changing network settings before checking the current value to ensure the information is up to date.
Comments
0 comments
Article is closed for comments.