Bolt
FAQ
- What power connector and cable pinout is used by the Bolt?
- What is the minimum physical distance for operating multiple Bolt sets?
- Can a Bolt receiver be paired with multiple transmitters simultaneously?
- How many Bolt receivers can be paired with each transmitter?
- Which Bolt models allow manual frequency / channel selection?
- Power & Frequencies of Bolt Units
Getting Started
- Which model / generation Bolt do I have?
- Which model / generation Bolt Sidekick receiver do I have?
- Understanding the difference between "Pairing" and "Linking" a Bolt set
- Bolt compatibility for 1st/2nd/3rd generation and shorter/longer range units
- Is my Bolt compatible with Bolt Utility or Bolt Manager?
- Upgrading the firmware or changing settings on a Bolt
Advanced Topics
- Does the Bolt transmitter pass all video lines to the receiver?
- Supported 3G-SDI Level A and Level B formats on Bolt
- Using longer cables between the Bolt TX / RX and external antennas
- What are the limitations in using 20 MHz channels on the Bolt 3000?
- Changing between 20 MHz and 40 MHz modes on the Bolt 3000
- Enabling the High Quality Mode setting on Bolt 600 / 2000 TX units
Documentation
- Bolt Manager : Software Manual (September 2015)
- 2nd gen Bolt Sidekick II : Quick Start Guide (November 2016)
- 3rd gen Bolt 1000 and 3000 : Quick Start Guide (November 2016)
- 3rd gen Bolt 500 : Quick Start Guide (November 2016)
- 2nd gen Bolt 600 and 2000 : Quick Start Guide (July 2014)
- 2nd gen Bolt 300 : Quick Start Guide (August 2014)
Video Tutorials
- Bolt Manager - Firmware Upgrade
- Bolt Manager - Frequency Selection
- Bolt - Custom LUTs
- Bolt 600 + 2000 LCD Basics
- Bolt 2nd generation (300, 600, or 2000) Pairing
- Spectrum Analyzer (3rd Generation only)
2nd generation
Bolt Sidekick Receiver
- Which Bolt or Paralinx models can be paired with the 1st gen Sidekick?
- Which Bolt or Paralinx models can be paired with the 2nd gen Sidekick?
- Does the 1st or 2nd gen Sidekick have LUT, USB 3.0 or video scaling capabilities?
- How many Sidekick receivers can be paired with a transmitter?
- Does the 1st or 2nd gen Sidekick allow time code and start / stop record flags?
Accessories
Known Issues
Troubleshooting
- The Bolt is not detected by Bolt Manager over USB
- Reporting issues with time code or record flag transmission on the Bolt
- Unable to upgrade Controller on some 1st gen Sidekick receivers
- Fixing Pairing Issues
- How do I reset my 2nd gen Bolt 300 / 3rd gen 500 RX to a compatible resolution?
- Bolt Manager does not display the Bolt serial number, or shows an incorrect serial number