TX to RX via Core

You can easily get your encoder connected with the decoder via Core.

First, you need to add the encoder as a Source to your Core account.

1. On your device's web interface, select the Cloud Services menu on the left and Authorize the encoder by copying the code.

2. Open the Source tab on Core and Add Encoder by inserting the code

3. Continue on the Web UI of the device and choose your Company name

4. Get your device connected to the server: On-Demand (pic. 4.1 and 4.2) or to the Cloud-hosted/Self-hosted you might have on your account (pic. 4.3)

NOTE 1: If you do not have Hyperion server(s) launched on Core, you can do it via Server tab on Core. Please, find more details here.

NOTE 2: Self-Hosted Hyperion are available for Enterprise accounts only.

(pic. 4.1)

(pic. 4.2)

(pic. 4.3)

When the Encoder gets connected to your Core account, it appears in the Sources tab:

Next, add the decoder to your Core account:

5. On your device's web interface, select the Cloud Services menu on the left and Authorize the encoder by copying the code.

6. Open the Destinations->Decoders tab on Core and Add Decoder by inserting the code (see pictures from step 2 above)
7. Continue on the Web UI of the device and choose your Company name
8. Get your device connected to the On-Demand or Hyperion Engine (refer to the step 4 for pictures and notes, if needed)

When the decoder gets connected to your Core account, it appears in the Destinations->Decoders tab:

The last stage is to connect your encoder and decoder

9. Link the decoder from the Encoder details page on Core, by Selecting the needed one:

You will see the linked decoders and encoders on their pages: