Bolt4KMax – Teradek – Knowledge – No video; 20MHz range

Bolt4KMax – Teradek – Knowledge – No video; 20MHz range

PROBLEM

‘No Video’ on RX in the 20 MHz range.

Setting the Bolt 4K TX to 20MHz range has limitations. Not all 20 MHz levels have been implemented in the Bolt 4K system

SOLUTION

We recommend using 40 MHz settings, enabling All frequencies with Video Quality to 'Auto'. This would be the ideal settings to accurately get video transmission.

Our engineers have confirmed that not all 20 MHz levels have been implemented in the Bolt 4K. Our next firmware release 7.5 will feature these updates pertaining to 20 MHz

If the issue persists, contact support at teradek.com/contact

Keywords

Bolt4KMax, Bolt4k, 4K, MAX, Range, no video, 20Mhz

CASE:   1113903