- Make sure to follow all the guidelines in this article to allow the units to pair successfully.
- Connect a monitor to the HDMI output of the Ace 500 RX
- Activate pairing mode on your Ace 500 TX by using a paper clip to press the recessed reset/pairing button (button F in the Ace 500 Quick Start Guide) for just 1 second, then release. The wireless link status LED on the Ace 500 TX may begin to flash rapidly.
- Activate pairing mode using the Menu button on the Ace 500 RX.
- The receiver will indicate if the pairing process was successful.
Comments
0 comments
Article is closed for comments.