Image Overlay requirements on the SERV Pro

The Serv series supports image overlay with the following stipulations:

• PNG file 737x200
• Solid and Solid-Transparent images are allowed.
• No Partial transparency (Alpha Blending) is supported (Transparency Gradients, fades etc).

To add an image overlay

• Navigate to the webpage of the encoder (usually via it's IP address)
• Click Encoder and then open the Image Overlay tab
• Change the overlay mode to image.
• Upload your PNG image
• Select the Location of image 

Examples:

This image would work

This image would have some issues due to some of the semi-transparent pixels: