Bolt DSMC2 receives video signals from the HDMI monitor path via the RED camera's VHDCI connector. This path is shared with the secondary LCD/EVF port located on the left side of the camera. Accessories connected to the secondary LCD/EVF or HDMI port on the expander will not function while a Bolt DSMC2 is enabled. There are three ways to enable the secondary LCD/EVF port:
- Navigate to MENU>MONITORING>MONITORS from the camera’s menu and
select the LCD/EVF LEFT option.
- Attach a monitor or accessory to the top LCD/EVF port instead of the secondary
LCD EVF port.
- Turn off Bolt DSMC2.