If you find yourself needing to pair the transmitter and receiver but can't find the IR cable and remote that comes with the kit, try the following steps:
- Power the transmitter and receiver. Connect the receiver to your monitor.
- On the Receiver, press and hold the SYNC button for at least 5 seconds.
- When you see "Please Activate Registration on Transmitter Unit", press and hold the SYNC button on the the transmitter for 5 seconds.
- The Receiver will acknowledge and press the SYNC button again to confirm.
That's it!
Note: Sometimes the units will not pair if they are too close together. We recommend a minimum distance of 5 feet.
Comments
0 comments
Article is closed for comments.