MK3.1 Controller - Recalibrating MK3.1 Focus Knob

To calibrate the focus knob go to MENU .... INPUTS ... RECAL KNOB .. then rotate the knob each way and gently touch the hard stops. Press set.

You will only need to re-calibrate the MK3.1 knob if you remove and refit.

PLEASE NOTE: If after calibration you see the the end stop range jump from 0 to 1 or 999 to 998 this means you have touched the end stops too hard, calibrate again with a more softer touch of the end stops.