Slave Controllers - Zoomrocker

The Slave Zoomrocker is a very ergonomic, highly flexible thumb/finger rocker control, with REC trigger.

It connects to the AUX port on a MK3.1 or Latitude Receiver (and will not function without the Receiver).

It requires the use of a 5 pin slave cable for use.

The button performs Run/Stop (Requires suitable run/stop cable from Receiver to Camera).

You need to make sure that the RT system is updated to Release 47 or higher for Zoomrocker support. Also that the AUX mode in the Controller menu is switched to 'Rocker'. 

The unit can also pivot via the Arri style Rosette on an M3 bolt allowing for better positioning. The clamp fits diameters from 22mm to 38mm. The unit is precision CNC milled and wire EDM cut from aerospace grade aluminium and is very lightweight, great for Steadicam and Gimbal use!