How to connect to Sharelink with the Vidiu Pro

1. Setup your account at  Sharelink.
2. Setup your Channels on Sharelink.
3. Setup your Vidiu pro to Connect to Sharelink.

There are several ways to authorize Sharelink with the Vidiu Pro. 

• Using the Front Panel
• Using the Vidiu App.
• Using the Web Interface of the device

When the Vidiu Pro starts up, you will need to provide an internet connection of some sort.  The quickest way to start up is to plug an Ethernet cable with DHCP or connect to your Wifi through the front panel.

The Vidiu Pro will ask you to choose a connection. Go ahead and select Setup Later.

Depending on when your Vidiu Pro left the Factory, it may have firmware update.  Please go ahead and update the firmware at this time.

Front Panel

Once the Vidiu Pro has booted up.  Press the MENU button on the right. You can use the MENU button as a 5 way joystick to navigate through the Menus. Continue to scroll down to SHARELINK SETTINGS and press the MENU button.  Select the MENU button to Enable Sharelink and MENU again to Authorize Sharelink.

A code will pop up

Go back to your computer and log into Sharelink.  Select "Add new Vidiu" at the Bottom of that page.  The Vidiu should show up after a few moments.

You should be able to select a connection from the list 

Vidiu App

If you've never setup your Vidiu Pro before, you should be able to connect to the Vidiu by connecting your phone to the Access Point.  When you browse for wifi on your phone you should see an open access point called VidiU-Pro-xxxxx.  Once you have connected, you should be able to browse for the VidiU device.

If you don't have an internet connection, you can proxy your phone's internet connection by Sharing Device Data (if your carrier supports it).

Select Settings and then Select Sharelink and Login with your credentials

Make sure you select a location that you want to connect to and ENABLE Sharelink

(In the current firmware, ap-south-1 is India and ca-central-1 is Canada)

Web Interface

Using a computer, find the IP address of the Vidiu (MENU>Network Settings>Wired/Wifi>Status) and enter that IP into a web browser.

Select Settings on the top right corner and then click Sharelink.

Sign in with your Sharelink credentials and select a location

(In the current firmware, ap-south-1 is India and ca-central-1 is Canada)

Once you have signed in, you can then add destinations to your Stream in Sharelink at https://sharelink.teradek.com