What are the input power requirements for the VidiU Pro?

Voltage Input

The VidiU Pro accepts power input with a minimum of 6 Volts and a maximum of 18 Volts (indicated on the chassis near the DC barrel jack connector).

• It's not possible to use a lower value power input such as 5 Volts from a USB port or USB power / battery pack since that falls below the minimum input.
• The use of greater than 18 Volts can damage the product and is not covered under warranty.

DC Barrel Jack Connector

The DC barrel jack connector used with the VidiU Pro has an outer diameter (OD) of 5.5 mm, an inner diameter (ID) of 2.1 mm, and a barrel length of 9.5 mm.

The polarity is center / tip positive, outer ring is GND.

Applies to:

VidiU Pro