LEMO connector / part number
Teradek uses a 0B 302 series LEMO connector on our products.
The part number used on the cables sold by Teradek is FGG.0B.302.CLAD42.
If custom power cables are being made, the part number will depend on the type of wiring used -- thicker wires will need a larger collet and have a larger value for the numbers after CLAD in the part number.
- Pin 1 : GND
- Pin 2 : +DC
NOTE: Pin 1 is closest to the red dot on the LEMO connector.
Custom / 3rd Party Power Cables
- Test the power cable polarity with ONLY the power cable connected to Bolt. Do not connect video cables.
- Check the power cable for shorts and proper grounding.
Using a reverse polarity or improperly−constructed power cable can damage the product and is not covered under warranty.
The above information is also included in the Quick Start Guide for each Bolt series.