Today we will cover how to restore your Clip via Recovery Mode.
In your desktop web browser, go to www.teradek.com/pages/downloads and select Clip from the drop down menu.
Download the latest release firmware. From here, we can power on our Clip in Recovery Mode.
Hold the reset button next to the LED banks then power on your Clip. Once all 12 LEDs are lit, release the reset button.
Once your Clip is in Recovery Mode, connect to the WiFi Network TeraRecovery
In your web browser, type in the IP address 172.16.1.1 to access your Clip
Select the .bin firmware image file that you previously downloaded and click restore.
If you're unable to see the TeraRecovery network from multiple Wi-Fi devices, or you've performed the Recovery Mode procedure and your Clip is still unable to boot, please contact firstname.lastname@example.org and reference this article.