The front panel OLED display on the 2nd and 3rd generation Cube series can be turned off immediately, or it can be set to dim after a specified time frame (3rd generation only) in firmware versions from April 2017 or later.
To immediately turn off the display, your Cube must first be at the home configuration screen where it shows the streaming platform and device status.
- To turn off the display, press and hold the black Menu joystick to the left for 2 seconds, then release. Select Yes when prompted, or select No to cancel and leave the display active.
- To turn on the display, quickly press and release the red Start/Stop joystick or the black Menu joystick in any direction.
To adjust the timeout settings for the display, use the black Menu joystick to select System Setup, Display Settings, Dim, and choose from Never / 1 minute / 5 minute / 10 minute / 30 minute / 1 hour values.
Comments
0 comments
Article is closed for comments.