Local Monitoring of a stitched rig on an additional iPad or iPhone

An additional iOS device (iPhone or iPad) can be used for local monitoring of the stitched rig.

This does not require Internet connectivity for the additional iOS device, the Sphere, or the iPad performing the stitch since all communication is sent over the same local network.

1. Download the Teradek Sphere app to the iOS device that will be used to monitor the stream.

2. Connect the iOS device to the same network as the iPad which is performing the stitch. This can be done over a Wi-Fi connection, or over a wired Ethernet connection as described in this article.

3. On the iPad which is performing the stitch, tap Play, Streaming, then Start Local Stream.

4. Open the Sphere app on the additional iOS device, then tap Streams, Local Streams, then View Stream.

The monitoring device can toggle between Panoramic View, Rectilinear View, Little Planet View, or VR Headset modes.