Upgrading the firmware or changing settings on a Bolt

Firmware updates / device setting changes are only performed with the USB 2.0 (Mini Type B, 5 connector) port on the Bolt transmitter or receiver. 

Refer to the Quick Start Guide for your Bolt to determine the location of the USB 2.0 port.

Quick Start Guide are found in the Bolt Documentation section at this link.


NOTE: if you have a 2nd or 3rd generation Bolt set, it is not possible to use the USB 3.0 (Micro Type B) port on the Bolt receiver / RX for firmware updates or setting changes; the USB 3.0 port is only used for video capture as described in this article.


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.