Use the built-in menu buttons and display on the Serv Pro to find the current IP address for the Ethernet and Wi-Fi connections.
Wireless connection / Serv Pro in Access Point (AP) mode
- Press in on the black Menu button, select Network Setup, then WiFi.
- The mode should be set to Access Point, and the name of the wireless network being generated by the Serv Pro is displayed.
- Select Status to display the default IP address of the Serv Pro in AP mode, which is 172.16.1.1.
Wireless connection / Serv Pro in Wi-Fi Client mode
- Press in on the black Menu button, select Network Setup, then WiFi.
- The mode should be set to Infrastructure, and the name of the wireless network that the Serv Pro is currently connected to is shown.
- Select Status to display the IP address of the Serv Pro; if the Serv Pro is configured to use DHCP instead of a Static IP address, then this IP address is assigned by the network and can change each time the Serv Pro connects.
Wired Ethernet
- Press in on the black Menu button, then scroll and select Network Setup, then Wired.
- The IP address in use by the Serv Pro is shown. Additional information on the Serv Pro's Ethernet connection is obtained by selecting Status.
Comments
0 comments
Article is closed for comments.