What power connector and cable pinout is used by the Serv Pro?

2-pin locking power connector / part number

Teradek uses a locking 2 pin power connector equivalent to the 0B 302 series LEMO connector.

One example of a LEMO connector part number which could work is FGG.0B.302.CLAD42.

If custom power cables are being made, the exact part number will depend on the type of wiring used -- thicker wires will need a larger collet and have a larger value for the numbers after CLAD in the LEMO part number.

Pin-out:

• Pin 1 : GND
• Pin 2 : +DC

NOTE: Pin 1 is closest to the red dot on the locking 2 pin connector.

Custom / 3rd Party Power Cables

• Test the power cable polarity with ONLY the power cable connected to the Serv Pro. Do not connect video cables.
• Check the power cable for shorts and proper grounding.

CAUTION

Using a reverse polarity or improperly−constructed power cable can damage the product and is not covered under warranty.