2-pin locking power connector / part number
Teradek uses a locking 2 pin power connector equivalent to the 0B 302 series LEMO connector.
One example of a LEMO connector part number which could work is FGG.0B.302.CLAD42.
If custom power cables are being made, the exact part number will depend on the type of wiring used -- thicker wires will need a larger collet and have a larger value for the numbers after CLAD in the LEMO part number.
- Pin 1 : GND
- Pin 2 : +DC
NOTE: Pin 1 is closest to the red dot on the locking 2 pin connector.
Custom / 3rd Party Power Cables
- Test the power cable polarity with ONLY the power cable connected to the Cube. Do not connect video cables.
- Check the power cable for shorts and proper grounding.
- Cubes with Batteries: When testing, make sure the power is actually coming from the DC jack and not the battery before applying video
Using a reverse polarity or improperly−constructed power cable can damage the product and is not covered under warranty.